ENCODER COUPLING
ENCODER COUPLING connects two shafts to transmit torque, motion.This coupling can adjust itself to misalignment of two shafts connected by it. Misalignment may be angular, parallel . When motion transmission is important, the misalignment should not affect the velocity & acceleration of the shaft.This calls for a torsionally rigid, yet flexible coupling.
Features of These ENCODER COUPLINGS:
-
- Aluminium Alloy, Stainless Steel,Brass, Nylon Material Used As per Application
- Angular Offset upto 6 degrees
- Parrallel offset up to 0.2 mm
- Backlash Free Coupling
- Torsionally Stiff Coupling
- Acts As A Fuse or Torque Limiter Thus Protects your encoder or Drives
- Single Piece Construction
Series A
| OUTER DIA. | LENGTH | d1 and d2 H7 mm | Clamping |
| D | L | MIN- MAX | SCREW S |
| 14 | 20 | 2.00-4.00 | M 3 |
| 16 | 24 | 3.00-8.00 | M 3 |
| 20 | 28 | 4.00-11.00 | M 3 |
| 25 | 32 | 5.00-12.70 | M 4 |
| 32 | 40 | 8.00-15.00 | M 4 |
| 35 | 40/50 | 10.00-20.00 | M 5 |
| 40 | 50 | 11.00-25.00 | M 5 |
| 50 | 50/60 | 12.00-30.00 | M 6 |
Series B
| OUTER DIA. | LENGTH | d1 and d2 H7 mm | Clamping |
| D | L | MIN- MAX | SCREW S |
| 14 | 20 | 2.00-4.00 | M 2.5 |
| 16 | 24 | 3.00-6.00 | M 2.5 |
| 20 | 28 | 4.00-10.00 | M 3 |
| 25 | 32 | 5.00-11.00 | M 3 |
| 32 | 40 | 8.00-12.00 | M 4 |
| 35 | 40/50 | 10.00-17.00 | M 5 |
| 40 | 50 | 11.00-20.00 | M 5 |
| 50 | 50/60 | 12.00-25.00 | M 6 |